Posts

Showing posts from 2013

Setting Up Tpad for X-lite

Image
Most such devices need to be configured. The normal way of doing this is via a menu on the phone or via a web based menu that appear when the IP address of the phone is typed into a web browser. Just like Softphones you will need to amend the Settings to the following. You do not need to do this if a phone has already been set up for you. Exact descriptions may vary with phone type and not all of these may be requested in the menu. See the individual section on IP phones and Mobile Phones. Normally you leave most things as default and just enter server addresses (sip.tpad.com), Tpad Number and Password in relevant places. IP Address mode DHCP (dynamic is best) Registrar: sip.tpad.com Proxy server: sip.tpad.com Outbound proxy server: sip.tpad.com Account name/User ID/SIP ID Sometimes called Authentication ID = Your  Tpad Number  e.g. 17XXXXX Password/ Authen. password = Your  password  which you created SIP port: 5060 (or 8891 or 8791 or 80 if VoIP is blocked in your Area)

Expand the Range of your Wireless Network with any Old Router Add, Don't Replace When Upgrading

Image
The wireless range offered by your router will vary depending on which Wi-Fi standard it supports – is it 802.11g or 802.11n compatible? – and its physical location (if there are any walls around, they will obstruct the Wi-Fi signal). Expand your Wireless Network’s Range with an Old Router What should you therefore do to ensure that the Wi-Fi signals are available in full strength in every corner of your house? You can easily extend your Wi-Fi network with some additional hardware – like Wi-Fi repeaters and Wireless Access Points – but if you want to save a few bucks, just get hold of an old wireless router that you no longer use and connect it to your existing router using an inexpensive Ethernet cable. Our premises is around 100 feet by 200 feet with plenty of walls (see the above illustration) and yet there’s wireless Internet access available in almost every part of the house. The setup is extremely simple. All I have is a main Wireless-N router connected to the ISP

TP LINK- configuration for BSNL Broadband

Image
 TP Link provides different modem models having great features like better wi-fi range, high internet speeds, strong signal strength etc. You can broswer internet at high speeds with these TP Link models. When you purchase in new TP Link modem, you can configure modem settings from nearest bsnl exchange or you can configure your TP link modem yourself at home. You just need your bsnl broadband username and password for configuration provided by bsnl when your broadband connection was activated. If you are using an old TP link modem and you have already done any previous settings on TP link modem. but your modem is not working fine at this time, You should restore factory setting for TP link modem before proceeding to next step. But if you have just purchased new TP link modem. It has no settings, just go straight to TP link modem settings step directly. Restore Factory settings. Connect ADSL broadband wire to ADSL port on TP link modem through splitter. After connecting the